AVSL 153.107 LED MIRROR BALL MOTOR - Manual

OPERATION:
The switch has two functions, Single line = Slow colour change,
O = Power off and Double lines = Power ON
GENERAL SAFETY RECOMMENDATIONS:
1)
Before installation check the unit is in good condition. If
damaged do not install the batteries.
2) If the unit it is not functioning correctly return to your
retailer and do not attempt to repair yourself as there are
no user serviceable parts inside.
3) Use indoors only
4) Install with a distance of at least 0.5m from flammable
materials (decoration materials and others.
5) The installation must be done in such a way that it can
support 10 times the weight of the mirror ball for at least 1
hour without showing any distortion.
6) The motor needs to be installed perfectly horizontally.
Check the position with a spirit level.
7) Both the motor and the mirror ball must be installed out of
reach of persons
8) Ensure all screw holes are used
9) Use only the supplied chain.
10) Check the unit regally to ensure it has incurred no damage
and is still in fully working order.
SPECIFICATIONS:
Power: 12Vac / 500mA
Max Load: 3kg
Max Ø of the Mirror ball: 30cm
Rotation Speed: 6rpm
Weight: 0.3kg
www.qtxlight.com