Armasight IAIR002LP000001 DRAKOS 2 Multi-Spectral Laser Aiming/ Illumination Devices - Manual (Page 3)

3
WARNING:
Remember to reinstall the safety lock screw after you have complet- •
ed operation.
The light from the equipment’s IR laser emitter(s) is invisible to the
•
naked eye. However, the light can be detected by all night vision de-
vices (NVD). To reduce the risk of detection, avoid prolonged activa-
tion of the IR laser(s).
The IR light is more detectable by other NVDs when used in smoke,
•
fog and rain. Avoid prolonged activation of the IR laser(s) in these
conditions.
WARNING:
When installing the equipment on a weapon, be sure the weapon is •
CLEAR and that the SAFETY is on before proceeding.
Take note of the laser safety warning label sticker located near the
•
laser emission aperture. NEVER REMOVE this sticker, which identifies
laser wavelengths, laser output power sources, and the safety class
of the equipment according to the IEC 60825-1:2007 standard.
NEVER LOOK INTO THE LASER BEAM.
•
DO NOT leave the Drakos activated when not in active use. •
When adjusting the equipment boresight, beware of reflections •
from optical surfaces.
CAUTION:
Do not dismantle the equipment. •
Keep the equipment clean. Protect it from moisture, dramatic tem- •
perature changes, and electric shocks.
DO NOT drop or hit the equipment.
•
DO NOT force the equipment controls past their stopping points. •
Do not store the equipment with the battery still installed. •
Thoroughly clean and dry each item before replacing them in the •
storage carton.