Asus P5N7A-VM - Manual (Page 76)

2-24 Chapter 2: BIOS setup
iGPU and Ext-VGA Selection [Disable iGPU if Ex]
Allows you to select the internal VGA card or the external VGA card to display.
Configuration options: [Disable iGPU if External VGA Card Exist] [Both Exist and
iGPU by Frame Buffer Detect]
iGPU Frame Buffer Detect [Auto]
Allows you to disable the iGPU Frame Buffer Detect or set it to auto mode.
Configuration options: [Disabled] [Autuo]
iGPU Frame Buffer Size [32 MB]
Allows you to set the iGPU Frame Buffer Size. This item becomes user
configurable when the iGPU Frame Buffer Detect item is set to [Auto].
Configuration options: [32 MB] [64 MB] [128 MB] [256 MB] [512MB] [Disabled]
ADD2 Card Type [ADD2]
Allows you to select the ADD2 card type. Configuration options: [ADD2] [ADD2-R]
Retrain PCIE devices to Gen2 [Yes]
Allows you to enable or disable all capable devices populated in PCIE slots to
retrain to Gen2 speed. Configuration options: [Yes] [No]
Realtek GigaBit LAN [Auto]
Allows you to disable Realtek GigaBit LAN or set it to auto mode.
Configuration options: [Auto] [Disabled]
LAN Boot ROM [Disabled]
Allows you to enable or disable the LAN boot ROM.
Configuration options: [Disabled] [Enabled]