Asus WL-500g Deluxe - Manual (Page 73)

3. Utilities
ASUS Wireless Router 73
Chapter 3 - Software Configuration
IP Config (Access Point Mode)
Click this item on the menu to reveal a sub menu.
Follow the instructions to setup the ASUS Wireless
Router. Tips are given when you move your cursor
over each item.
LAN
Get IP Automatically
Select Yes (default) or No to get IP address automatically from a DHCP
server.
Yes
This parameter determines if the ASUS Wireless Router will send out a
DHCP request during bootup. If you have a DHCP server on the network,
set this option so that the ASUS Wireless Router can receive an automatic
IP address assignment.
If you have a DHCP (Dynamic Host Configuration Protocol) server on the
network, then the DHCP server will automatically assign the ASUS Wireless
Router an IP address when the ASUS Wireless Router is powered up. To determine
what IP address has been assigned to the ASUS Wireless Router, review the IP
address on the “Status” page available on the “Main Menu”.
No
The ASUS Wireless Router also accepts a static IP address. You may
manually configure the IP address and subnet mask on the “IP Config”
page. Enter an IP address and a subnet mask in the field provided to assign
the ASUS Wireless Router a static IP address. If you don’t know your
Gateway setting, leave it empty (not 0.0.0.0).
Selection items:
• Yes (no info required)
• No (need to input information)
Click Apply or Finish if you make
any changes.