Asus WL-500g Deluxe - Manual (Page 72)

3. Utilities
72 ASUS Wireless Router
Chapter 3 - Software Configuration
First step for setting your wireless
interface is to give it a name, called
SSID. In addition, if you would like
to protect transmitted data, please
select WEP protection and assign
WEP keys for data transmission.
Your wireless setting will be applied
into all interfaces.
(See next few pages for item
descriptions.)
If you would like to perform other settings, click an item on the
menu to reveal a sub menu. Follow the instructions to setup the
ASUS Wireless Router. Tips are given when you move your cursor
over each item.
System Setup (Cont.)
AP Mode
After selecting “Access Point” mode and clicking “Apply”, you will enter
the “Quick Setup” page of the Access Point mode. Follow the instructions
to setup the ASUS Wireless Router.
Note: The Wireless settings are the same as the settings in Home
Gateway Mode. To learn more about these settings, please refer to
the Home Gateway Mode in this user’s manual.
Quick Setup in Access Point Mode
Click Next to enter the Quick Setup page. Follow the instructions to setup
the ASUS Wireless Router.
Configure Wireless Interface