Nat setting (cont.) – Asus WL-500g Deluxe User Manual
Page 53
3. Utilities
ASUS Wireless Router
53
Chapter 3 - Software Configuration
NAT Setting (Cont.)
Click this item on the menu to reveal a sub menu.
Follow the instructions to setup the ASUS wireless
router. Tips are given when you move your cursor
over each item.
Virtual Server
To make services, like WWW, FTP,
provided by a server in your local
network accessible for outside
users, you should specify a local IP
address to the server. Then, add the
IP address and network protocol
type, port number, and name of the
service in the following list. Based
on the list, the gateway will forward
service request from outside users
to the corresponding local server.
Enable Virtual Server?– Selecting
“Yes” applies all those rules in
Virtual Server List into the Wireless Router.
Virtual Server List
Local IP – This field stands for the destination IP address that you like to
redirect the matched packet to.
Port Range– This field stands for a port number or a range of ports. Once
the destination port of incoming packets matches the port or within the port
range, the incoming packets will be redirect to IP address specified in Local
IP.
Protocol– This field stands for protocol of incoming packets.
Description –This field allows you to record what this rule is used for.