Asus WL-500g Deluxe - Manual (Page 39)

3. Utilities
ASUS Wireless Router 39
Chapter 3 - Software Configuration
Wireless (Cont.)
MAC Address
Enter the MAC address of the target ASUS Wireless Router in order to
designate which ASUS Wireless Router will be the partner for this ASUS
Wireless Router.
You can setup your wireless environment as shown in this figure:
Note: The content in braces “( )” is the MAC address in the Remote
Bridge List of the AP. For example, WB1 have the MAC address of
WB in its Remote Bridge List.
In this case, there are six ASUS Wireless Routers and they are linked as
wireless bridges. Take one of them, named WB, as an example. WB is not
in “AP Only” mode and “Connect to APs in Remote Bridge List” is set as
“Yes”, so it can connect to WB3. Meanwhile, “allow anonymous” is set as
“Yes” or “Allow anonymous” is set as “No” but it has the MAC addresses
of WB1, WB2, and WB4 in the “Remote Bridge List”, so it can be connected
by WB1, WB2, and WB4.