Asus WL-500g Deluxe - Manual (Page 46)

3. Utilities
46 ASUS Wireless Router
Chapter 3 - Software Configuration
Special Requirement from ISP
The following two items may be specified by some ISPs. Check with your
ISP and fill them in if required.
Host Name – Fill this in if required by your ISP.
MAC Address – Fill this in if required by your ISP.
Heart-Beat Server (WL500g Deluxe) - Fill in the server name or server IP
address when you are connecting with BigPond.
LAN IP Setting
IP Address - This is IP address of the Wireless Router as seen in your local
network. The default value is 192.168.1.1.
Subnet Mask - This is Subnet Mask of the Wireless Router as seen in your
local network. The default value is 255.255.255.0.
Host Name - This is Host Name of the Wireless Router as seen in your
local network.
WL500g Deluxe WL500g
PPPoE MTU - This field is shows the Maximum Transmission Unit (MTU)
of PPPoE packets.
PPPoE MRU - This field is shows the Maximum Receive Unit (MTU) of
PPPoE packets.
Enable PPPoE Relay - Enable PPPoE relay allows stations in LAN to
setup individual PPPoE connections that are passthrough NAT. It is also
known as PPPoE multi-session.