Asus MAXIMUS VI IMPACT - Manual (Page 96)

3-12 Chapter 3: BIOS setup
Chapter 3
Load 2GB RAW MHz
Configuration options: [Yes] [No]
Load 4GB/8GB RAW MHz
Configuration options: [Yes] [No]
Maximus Tweak [Auto]
[Auto]
Allows the system to set the memory compatibility, overclocking, and
system performance.
[Mode 1] Helps memory compatibility in your system.
[Mode 2] Helps overclocking and stabilizes system performance.
Primary Timings
DRAM CAS# Latency [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# to CAS# Delay [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# PRE Time [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# ACT Time [Auto]
Configuration options: [Auto] [1] – [63]
DRAM COMMAND Rate [Auto]
Configuration options: [Auto] [1] – [3]
Latency Boundary A [Auto]
Configuration options: [Auto] [1] – [27]
Latency Boundary B [Auto]
Configuration options: [Auto] [1] – [14]
Latency Compensator [Auto]
Set this item to [Enabled] to improve performance and overclocking.
Configuration options: [Auto] [Enabled] [Disabled]
Secondary Timings
DRAM RAS# to RAS# Delay [Auto]
Configuration options: [Auto] [1] – [15]
DRAM REF Cycle Time [Auto]
Configuration options: [Auto] [1] – [511]
DRAM Refresh Interval [Auto]
Configuration options: [Auto] [1] – [65535]