beautypg.com

Chapter 3 – Asus MAXIMUS VI IMPACT User Manual

Page 103

background image

ASUS MAXIMUS VI IMPACT

3-19

Chapter 3

DRAM Voltage Frequency [Auto]
Allows you to adjust the DRAM switching frequency. Assign a fixed high DRAM

frequency to increase the overclocking range or a low DRAM frequency for a better

system stability.

Configuration options: [Auto] [Manual]

The following item appears only when you set set the DRAM Frequency Mode item to

[Manual].

DRAM Fixed Frequency(KHz) [300]

Allows you to set a fixed DRAM frequency. Use the <+> or <-> keys to

adjust the value. The values range from 300kHz to 500kHz with a 10kHz

interval.

Tweakers’ Paradise

The subitems in this menu allow you to set the CPU ratio and features.

BCLK Tuning
VCCIN Shadow Voltage [Auto]
Allows you to set a pseudo voltage for VCCIN. Use the <+> or <-> key to adjust the

value. The values range from 0.800V to 2.440V at 0.010V increment.
Termination Anti-Aliasing [Auto]
Set this item to [Enabled] to smooth out the change of the PLL Termination Voltage,

which helps yield a better overclocking result.

Configuration options: [Auto] [Disabled] [Enabled]
Initial PLL Termination Voltage [Auto]
Initial Voltage at which CPU BCLKs are terminated. Maintaining a level close to CPU

Input Voltage helps base clock overclocking. Use the <+> or <-> key to adjust the

value. The values range from 0.00V to 3.00V at 0.00625V increment.
PLL Termination Reset Voltage [Auto]
Set a phase-locked loop termination reset voltage. Use the <+> or <-> key to adjust the

value. The values range from 0.00V to 3.00V at 0.00625V increment.
Eventual PLL Termination Voltage [Auto]
Set an eventual phase-locked loop termination voltage. Use the <+> or <-> key to

adjust the value. The values range from 0.00V to 3.00V at 0.00625V increment.