Asus M4N78 Pro - Manual (Page 63)

Chapter 2: BIOS setup 2-27
Reset User Data [No]
Allows you to clear Express Gate’s user data.
Configuration options: [No] [Reset]
When setting this item to [Reset], make sure to save the setting to the BIOS so that the
user data will be cleared the next time you enter the Express Gate. User data includes the
Express Gate’s settings as well as any personal information stored by the web browser
(bookmarks, cookies, browsing history, etc.). This is useful in the rare case where corrupt
settings prevent the Express Gate environment from launching properly.
The first time wizard will run again when you enter the Express Gate environment after
clearing its settings.
2.8.3 ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
Add Your CMOS Profile.
Allows you to save the current BIOS file to the BIOS Flash. In the Name sub-item, type your
profile name and press , and then choose a profile number to save your CMOS
settings in the Save To sub-item. You can save eight (8) CMOS profiles.
Load CMOS Profile.
Allows you to load the previous BIOS settings saved in the BIOS Flash. Press , and
choose a profile to load.
Start O.C. Profile
Allows you to run the utility to save and load CMOS. Press to run the utility.
• This function can support devices such as a USB flash disk or a floppy disk with FAT
32/16 format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent the system
boot failure!
• Suggest only to update the BIOS file coming from the same memory/CPU configuration
and BIOS version.
• Only the “xxx.CMO” file can be loaded.
2.8.4 AI NET 2
Check Marvell Phy LAN cable [Disabled]
Enables or disables checking of the Marvell LAN cable during the Power-On Self-Test
(POST).
Configuration options: [Disabled] [Enabled]