beautypg.com

3 security – Asus M4N78 Pro User Manual

Page 61

background image

Chapter 2: BIOS setup

2-25

Hit ‘DEL’ Message Display [Enabled]

When set to [Enabled], the system displays the message Press DEL to run Setup during

POST.

Configuration options: [Disabled] [Enabled]

2.7.3

Security

The Security menu items allow you to change the system security settings. Select an item

then press to display the configuration options.

Change Supervisor Password

Select this item to set or change the supervisor password. The Supervisor Password item on

top of the screen shows the default Not Installed. After you set a password, this item shows

Installed.

To set a Supervisor Password
1.

Select the Change Supervisor Password item and press .

2.

From the password box, type a password composed of at least six letters and/or

numbers, then press .

3.

Confirm the password when prompted.

The message “Password Installed” appears after you successfully set your password.

To change the supervisor password, follow the same steps as in setting a supervisor

password.

To clear the supervisor password, select the Change Supervisor Password then press

. The message “Password Uninstalled” appears.

If you forget your BIOS password, you can clear it by erasing the CMOS Real Time Clock

(RTC) RAM. See section 1.9 Jumpers for information on how to erase the RTC RAM.

After you have set a supervisor password, the other items appear to allow you to change

other security settings.

User Access Level [Full Access]

This item allows you to select the access restriction to the Setup items.

Configuration options: [No Access] [View Only] [Limited] [Full Access]

No Access prevents user access to the Setup utility.
View Only allows access but does not allow change to any field.
Limited allows changes only to selected fields, such as Date and Time.
Full Access allows viewing and changing all the fields in the Setup utility.

Change User Password

Select this item to set or change the user password. The User Password item on top of the

screen shows the default Not Installed. After you set a password, this item shows Installed.

To set a User Password:
1.

Select the Change User Password item and press .

2.

On the password box that appears, type a password composed of at least six letters

and/or numbers, then press .