Asus M4N78 Pro - Manual (Page 52)

2-16 ASUS M4N78 PRO
Configuration options: [Auto] [DCT 0] [DCT 1] [Both]
The following sub-items appear only when you set the DQS Timing User Controls item to
[DCT 0], [DCT 1] or [Both].
CKE Setup Time [Auto]
Allows selection of the default setup time for the CKE pins versus MEMCLK.
Configuration options: [Auto] [1/2 CLK] [1 CLK]
CKE Fine Delay [00]
Appears only when you set the CKE Setup Time item to [1/2 CLK] or [1 CLK]. Allows you to set
how long the CKE pins are delayed from the default setup time. Type the desired values using
the numeric keypad and press the key. You can also use the <+> and <-> keys to adjust
the value. The value ranges from 0 to 31.
CS/ODT Setup Time [Auto]
Allows selection of the default setup time for the CS/ODT pins versus MEMCLK.
Configuration options: [Auto] [1/2 CLK] [1 CLK]
CS/ODT Fine Delay [00]
Appears only when you set the CS/ODT Setup Time item to [1/2 CLK] or [1 CLK]. Allows you to
set how long the CS/ODT pins are delayed from the default setup time. Type the desired values
using the numeric keypad and press the key. You can also use the <+> and <-> keys to
adjust the value. The value ranges from 0 to 31.
Addr/Cmd Setup Time [Auto]
Allows selection of the default setup time for the Addr/Cmd pins versus MEMCLK.
Configuration options: [Auto] [1/2 CLK] [1 CLK]
Addr/Cmd Fine Delay [00]
Appears only when you set the CKE Setup Time item to [1/2 CLK] or [1 CLK]. Allows you to set
how long the Addr/Cmd pins are delayed from the default setup time. Type the desired values
using the numeric keypad and press the key. You can also use the <+> and <-> keys to
adjust the value. The value ranges from 0 to 31.
The following six (6) items are adjusted by typing the desired values using the numeric
keypad and press the key. You can also use the <+> and <-> keys to adjust the
value. To restore the default setting, type [auto] using the keyboard and press the
key.
2.4.4 CPU Voltage [Auto]
Allows you to set the CPU voltage.
2.4.5 CPU/NB Voltage [Auto]
Allows you to set the voltage between the CPU and Northbridge.
The following four (4) items appear only when you set the Ai Overclocking item to
[Manual].
2.4.6 CPU VDDA Voltage [Auto]
Allows you to set the CPU VDDA voltage. The values range from 2.50V to 2.80V with a 0.10V
interval.