Asus AP120-E1 - Manual (Page 13)

ASUS AP120-E1 user guide 1-3
1.2 System specification
The ASUS AP120-E1 server/workstation is a stylish server/workstation
system featuring the ASUS P4P800S-E motherboard. The
server/workstation supports the Intel
® Pentium ® 4 processor in a 478-pin
socket, and includes the latest I/O, LAN, and storage technologies through
the chipsets embedded on the motherboard.
Chassis Pedestal with front panel I/O ports
Motherboard ASUS P4P800S-E
(ATX form factor: 12in x 9.6in)
Chipset Intel ® 848P Memory Controller Hub (MCH)
Intel ® ICH5R
Memory Supports three 184-pin DDR PC3200/27002100
unbuffered non-ECC DDR DIMMs for up to 2GB system
memory
Processor Supports Intel ® Prescott processor with 800MHz
front side bus
LAN Intel ® CSA 82547E1 1000 Gigabit Ethernet controller
Storage 2 x IDE connectors to support 4 UltraDMA100 devices
2 x Serial ATA connectors to support 2 serial ATA HDDs
with RAID 0 and RAID1 function
Onboard I/O PS/2 mouse/keyboard port, parallel port, serial port,
S/PDIF out port, floppy disk drive connector,
3 x IDE connectors, 6 x USB ports (four in rear panel,
two in front), LAN port, 2 x IEEE 1394 ports (one in front,
one in rear), audio I/O ports
Expansion Slots 5 x PCI slots
1 x AGP slot
1 x Wi-Fi slot
Drive Bays 1 x 3.5-inch floppy disk drive bay
1 x 3.5-inch hard disk drive bay
4 x 5.25-inch optical drive bays
Chassis fan 9cm chassis fan
Hardware Monitors Voltage, temperature, and fan speed monitoring
Power Supply 250W power supply with 20-pin ATX and 4-pin 12V plugs