Asus P5Q-EM DO - Manual (Page 78)

2-26 Chapter 2: BIOS setup
2.5.3 Onboard Device Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
Onboard Device Configuration
High Definition Audio [Enabled]
SPDIF Mode Setting [HDMI Output]
Front Panel Type [HD Audio]
LSI 1394 Controller [Enabled]
Marvell IDE Controller [Enabled]
Intel Onboard LAN Controller [Enabled]
Intel LAN Boot ROM [Disabled]
Serial Port1 Address [3F8/IRQ4]
Enable or Disable
High Definition Audio
Controller
BIOS SETUP UTILITY
Advanced
High Definition Audio [Enabled]
Allows you to enable or disable the High Definition Audio Controller.
Configuration options: [Enabled] [Disabled]
The following items appear only when you set the High Definition Audio item to [Enabled].
SPDIF Mode Setting [HDMI Output]
Allows you to set the SPDIF mode.
Configuration options: [HDMI Output] [SPDIF Output]
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or
high-definition audio depending on the audio standard that the front panel audio
module supports. Configuration options: [AC97] [HD Audio]
LSI 1394 Controller [Enabled]
Allows you to enable or disable the onboard 1394 controller.
Configuration options: [Enabled] [Disabled]
Marvell IDE [Enabled]
Allows you to enable or disable the onboard Marvell IDE controller.
Configuration options: [Enabled] [Disabled]
Intel Onboard LAN Controller [Enabled]
Allows you to enable or disable the onboard LAN controller.
Configuration options: [Enabled] [Disabled]
Intel LAN Boot ROM [Disabled]
This item appears only when the Intel Onboard LAN Controller is enabled.
Configuration options: [Enabled] [Disabled]
P5Q-EM DO.indb 26 12/9/08 12:35:52 PM