Asus P5Q-EM DO - Manual (Page 76)

2-24 Chapter 2: BIOS setup
ME Subsystem Configuration
ME Subsystem Configuration
ASF Support [Enabled]
ME HECI Configuration
ME-HECI [Enabled]
ME-EDER [Disabled]
ME-KT [Disabled]
Configure Intel AMT Parameters
ME BIOS Extension [Enabled]
BIOS SETUP UTILITY
Advanced
Disabled
Enabled
Options
ASF Support [Disabled]
Allows you to enable or disable the Alert Standard Format (ASF).
Configuration options: [Disabled] [Enabled].
ME HECI Configuration
ME-Device [Enabled]
When set to [Enabled], Host Embedded Communication Interface (HECI) provides an interface
for the exchange of message between the host software and the ME firmware. Configuration
options: [Disabled] [Enabled].
ME-IDER [Disabled]
Allows you to enable or disable the IDE Redirection interface by which the remote management
console is able to direct the client PC to boot. Configuration options: [Disabled] [Enabled].
The [Maximum DVMT] option appears only when you install DIMM modules more than 1
GB.
This motherboard supports Intel ® DVMT 5.0 Technology whose maximum graphics memory
size in total varies with the system memory size in total and the operating system. Refer to
the following table for details.
System Memory
Maximum Total Graphics Memory
Windows ® XP Windows ® Vista™
1GB to < 1.5GB 512MB 552MB
1GB to < 2GB 768MB 808MB
2GB to < 3GB 1024MB 1320MB
3GB to < 4GB — 1832MB
4GB and above — 1849MB
P5Q-EM DO.indb 24 12/9/08 12:35:50 PM