beautypg.com

P5q-em do analog front panel connector, P5q-em do atx power connectors – Asus P5Q-EM DO User Manual

Page 48

background image

1-34

Chapter 1: Product introduction

10. Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports either

HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O

module cable to this connector.

• We recommend that you connect a high-definition front panel audio module

to this connector to avail of the motherboard’s high-definition audio capability.

• By default, this connector is set to [HD Audio]. If you want to connect a

AC’ 97 front panel audio module to this connector, set the Front Panel

Type item in the BIOS setup to [AC97]. See section 2.5.3 Onboard Device

Configuration for details.

P5Q-EM DO

P5Q-EM DO Analog front panel connector

AAFP

PIN 1

GN

D

PRESENCE# SENSE1_RETUR

SENSE2_RETUR

PORT1

L

PORT1

R

PORT2

R

SENSE_SEND

PORT1

L

HD-audio-compliant

pin definition

PIN 1

AGND NC NC

NC

MIC

2

MICPWR

Line out_

R

NC

Line out_L

Legacy AC’97

compliant definition

• For a fully configured system, we recommend that you use a power supply

unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version)

and provides a minimum power of 400 W.

• Do not forget to connect the 4-pin ATX12V power plug; otherwise, the

system will not boot.

• Use of a PSU with a higher power output is recommended when

configuring a system with more power-consuming devices. The system

may become unstable or may not boot up if the power is inadequate.

11. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)

These connectors are for ATX power supply plugs. The power supply plugs are designed

to fit these connectors in only one orientation. Find the proper orientation and push down

firmly until the connectors completely fit.

P5Q-EM DO

P5Q-EM DO ATX power connectors

EATXPWR

PIN 1

GND

+5 Volts

+5 Volts

+5 Volts

-5 Volts

GND

GND

GND

PSON#

GND

-12 Volts

+3 Volts

+3 Volts

+12 Volts

+12 Volts

+5V Standby

Power OK

GND

+5 Volts

GND

+5 Volts

GND

+3 Volts

+3 Volts

ATX12V

PIN 1

+12V DC +12V DC

GND GND

P5Q-EM DO.indb 34

12/9/08 12:34:51 PM