Canon Prima BF-9s Set - Manual (Page 108)

´
108
Troubleshooting
In case of trouble check the table below before taking you
camera to be repaired.
Problem
The icon
blinks on the LCD
panel.
The icon is
not displayed on
the LCD panel.
The shutter does
not release.
The camera does
not work even after
new batteries have
been installed.
The photographs
are blurred.
The entire picture
appears cloudy.
Cause
• The batteries are
expired.
• No battery is loaded.
• The battries are
inserted with the
wrong polarities.
• The batteries have
completely expired.
• The power is turned
off.
• The batteries are
expired.
• A rewound film is
loaded in the
camera.
• The film is not
loaded properly.
• Due to the
characteristics of the
batteries.
• The camera moved
when the shutter
button was pressed
(camera shake).
• The lens is dirty.
Remedy
• Replace the new
batteries.
• Load the batteries.
• Reinsert the
batteries correctly.
• Replace the new
batteries.
• Turn the power on.
• Replace the new
batteries.
• Remove the film
and load a new
one.
• Reload the film.
• Remove the
batteries, then
insert them again
after about 10
minutes have
elapsed.
• Press the shutter
button slowly and
gently.
• Wipe the lens with
a lens cloth.
Page
26
26
26
26
28
26
36, 64
36
26
42
04-K129/AmeEuro (p.108~) 15-10-2002 10:45 Page 108