Bios setup – Asus A7V266-E/AA User Manual

Page 68

ASUS A7V266-E User’s Manual

4. BIOS SETUP

4. BIOS SETUP

PCI Configuration

USB Function [Enabled]

Set this field to [Enabled] if you want to use Universal Serial Bus (USB) devices.
Configuration options: [Disabled] [Enabled]

Primary VGA BIOS [PCI Card]

This field allows you to select the primary graphics card. Configuration
options: [PCI Card] [AGP Card]

SCSI/ATA100 Boot Sequence [ATA100/SCSI]

This field sets the priority of boot sequencing for either the ATA100 or the
SCSI controller. Configuration options: [ATA100/SCSI] [SCSI/ATA100]

IRQ XX Used By ISA [No/ICU]

These fields indicate whether or not the displayed IRQ for each field is
being used by a legacy (non-PnP) ISA card. The setting [No/ICU] for an
IRQ field indicates that you are using the ISA Configuration Utility (ICU),
and that this particular IRQ is NOT required by a legacy ISA card. Set the
IRQ field to [Yes] if you install a legacy ISA card that requires a unique IRQ
and you are NOT using ICU. Configuration options: [No/ICU] [Yes]

PCI IRQ Resource Exclusion

This manual is related to the following products:

A7V266-E