Hardware setup, Connectors 3. h/w setup, A7v266-e digital audio interface – Asus A7V266-E/AA User Manual
Page 41: A7v266-e chassis open alarm lead chassis
ASUS A7V266-E User’s Manual
41
3. HARDWARE SETUP
Connectors
3. H/W SETUP
A7V266-E
0
1
0
1
0
1
A7V266-E Digital Audio Interface
SPDIFIN
SPDIFOUT
GND
GND
21) Digital Audio Interfaces (2-pin SPDIFOUT/CDSPDIFIN) (optional)
These connectors connect SPDIF audio cable that allows digital instead of analog
sound output from CD-ROM, DVD-ROM, CD-RW, and advanced sound cards
such as SoundBlaster. Live.
22) Chassis Open Alarm Lead (4-pin CHASSIS)
This lead is for a chassis designed for chassis intrusion detection. This requires
an external detection mechanism such as a chassis intrusion monitor/sensor or
microswitch. When any chassis component is removed, the sensor is triggered
and a high-level signal is sent to this lead to record a chassis intrusion event.The
event is then be processed by software such as LDCM. When not using the
chassis intrusion lead, place a jumper cap over the pins to close the circuit.
A7V266-E
0
1
0
1
0
1
A7V266-E Chassis Open Alarm Lead
CHASSIS
+5V
olt
(Power Supply Stand By)
Ground
Chassis Signal
1