Asus A7V266-E/AA - Manual (Page 22)

22 ASUS A7V266-E User’s Manual
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
A7V266-E
0 1 0 1 0 1
A7V266-E Keyboard Wake Up
Enable
(Default)
KBWK
Disable
2 3 1 2
A7V266-E
0 1 0 1 0 1
A7V266-E USB/ACR Selection
ACRUSB
USB to Conn.
1 2
USB on ACR
2 3
9) ACR/USB Selection (ACRUSB1, ACRUSB2) (audio models only)
When set to pins 1-2, these jumpers allow you to activate USB port 3. Setting
the jumpers to pins 2-3 activates the Advanced Communication Riser (ACR)
slot. The default setting for both jumpers is 1-2. (NOTE: The USB port 2 is
always active regardless of the setting of these jumpers.)
IMPORTANT! Always set both jumpers accordingly when selecting a device.
8) Keyboard Wake Up (KBWK)
This allows you to disable or enable the keyboard power up function. Set this
jumper to Enable if you wish to use your keyboard (by pressing ) to
power up your computer. This feature requires an ATX power supply that can
supply at least 300mA on the +5VSB lead. The default is set to Enable. (The
computer will not power ON if you set this to Enable but do not have the correct
ATX power supply. NOTE: This jumper must be set in conjunction with Wake
On PS2 KB/PS2 Mouse/CIR in 4.5.1 Power Up Control.
Setting KBWK
Enable [1-2] (default)
Disable [2-3]