Hardware setup, A7v266-e bass center setting bcs, A7v266-e cpu core voltage selection – Asus A7V266-E/AA User Manual
Page 21
ASUS A7V266-E User’s Manual
21
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
6) Voltage Regulator Output Setting (VID1, VID2, VID3, VID4)
This jumpers allow you to manually adjust the CPU core voltage. It is
recommended to use CPU Default as the CPU core voltage. CPU Default, all
jumpers [2-3], means the Vcore is generated according to the CPU VID
configuration. For each jumper setting, there are two voltage options,
depending on the CPU used.
A7V266-E
0
1
0
1
0
1
A7V266-E Bass Center
Setting
BCS
type 1 Bass
1 2
type 2 Bass
2 3
(CENTER/BASS)
(BASS/CENTER)
(Default)
7) Bass Center Setting (CENTER/BASS, BASS/CENTER)
Use these jumpers in conjunction with the C-Media PCI Audio Driver and to
adjust output for 4 or 6 speaker audio. No audio standard exists for the three
pick-up surfaces on male audio jacks, therefore it may be necessary to switch
jumpers from the default position, type 1, to type 2, in order to help reroute
signals among the internal leads in the Line-In, Line-Out, Mic female sockets.
Make sure a test is made using the C-Media Audio Driver software setup available
on the Support CD.
A7V266-E
0
1
0
1
0
1
A7V266-E CPU Core Voltage
Selection
3
2
1
1.85/1.825Volts
VID2
VID3
VID1
VID4
VID2
VID3
VID1
VID4
3
2
1
1.75/1.725Volts
1.7/1.675Volts
1.8/1.775Volts
3
2
1
3
2
1
3
2
1
CPU Default
VID2
VID3
VID1
VID4