GE Industrial Solutions Austin Lynx II 12 V SMT - Manual

Data Sheet
October 1, 2009
Austin Lynx TM II 12 V SMT Non-Isolated Power Modules:
8.3 – 14.0Vdc Input; 0.75Vdc to 5.5Vdc Output; 10A Output Current
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS03-106 ver. 1.27
PDF name: lynx_II_12v_smt_ds.pdf
EZ-SEQUENCE TM
Applications
ƒ Distributed power architectures
ƒ Intermediate bus voltage applications
ƒ Telecommunications equipment
ƒ Servers and storage applications
ƒ Networking equipment
Features
ƒ Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
ƒ Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
ƒ Flexible output voltage sequencing EZ-SEQUENCE
ƒ Delivers up to 10A of output current
ƒ High efficiency – 93% at 3.3V full load (V
IN
= 12.0V)
ƒ Small size and low profile:
33.00 mm x 13.46 mm x 8.28 mm
(1.300 in x 0.530 in x 0.326 in)
ƒ Low output ripple and noise
ƒ High Reliability:
Calculated MTBF = 15 M hours at 25 o C Full-load
ƒ Output voltage programmable from 0.75 Vdc to 5.5
Vdc via external resistor
ƒ Line Regulation: 0.3% (typical)
ƒ Load Regulation: 0.4% (typical)
ƒ Temperature Regulation: 0.4% (typical)
ƒ Remote On/Off
ƒ Remote Sense
ƒ Output overcurrent protection (non-latching)
ƒ Overtemperature protection
ƒ Wide operating temperature range (-40°C to 85°C)
ƒ UL* 60950-1Recognized, CSA † C22.2 No. 60950-1-
03 Certified, and VDE ‡ 0805:2001-12 (EN60950-1)
Licensed
ƒ ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
Austin Lynx TM II 12V SMT (surface mount technology) power modules are non-isolated dc-dc converters that can
deliver up to 10A of output current with full load efficiency of 93% at 3.3V output. These modules provide a
precisely regulated output voltage programmable via an external resistor from 0.75Vdc to 5.5Vdc over a wide range
of input voltage (V
IN
= 8.3 – 14Vdc). The Austin Lynx TM II 12V series has a sequencing feature, EZ-SEQUENCE TM
that enable designers to implement various types of output voltage sequencing when powering multiple voltages on
a board. Their open-frame construction and small footprint enable designers to develop cost- and space-efficient
solutions. In addition to sequencing, standard features include remote On/Off, remote sense, output voltage
adjustment, over current and over temperature protection.
RoHS Compliant