GE Industrial Solutions A-Series II Panelboards SE_TED User Manual
A-series, Ii panelboards

DEH40153
DEH40153 Rev.No.02
1
g
A-Series
®
II Panelboards
AD/AE/AQ Type P & N Power Panel
SE/TED Three-Phase Circuit Breaker
Kits
Introduction
These instructions describe the installation of SE/TED three-phase circuit breaker kit into
an A-Series
®
II panelboard. These kits are for use in panelboards ordered with Un-
Specified Space.
The catalog number for six-pole SE/TED breaker kit is ASPP6SE6D
Parts List for ASPP6SE6D
Table 1.
ITEM #
DESCRIPTION
PART #
QTY
1
BRANCH BASE FOR B PHASE
139C5702BSEG1
1
2
BRANCH BASE FOR A PHASE
139C5702ASEG1
1
3
BRANCH BASE FOR C PHASE
139C5702CSEG1
1
4 (SPOOL)
315A7036P18
6
5 (SCREW-SPOOL)
315A7037P3
6
6 (WASHER-SPOOL)
75A105503P111 6
7 (SCREW-BUS)
315A7034P8
6
8 3P
BRACKET
139C5500P82
2
9
SCREW, BKT TO RAIL
N667P16008B6
8
10
SCREW, C/B TO BKT
N80P150046B6
4
11
FILLER PLATE, SE/TED/FB
139C5503P77
1
12
SCREWS , #10-32 X 3/8
N722P16006B6
4
13 NUT
N210P16B6
6
14 CUP
WASHER
254V644P1
4
Installation
WARNING: Before attempting to install one of these kits, remove all power from the
panelboard.
Use the following procedure to install a SE/TED circuit breaker kit. Call-out numbers in
the illustrations and numbers in brackets in the text refer to Item Numbers in Table 1.
Installation of a six-pole kit is illustrated in Figure 1 or Figure 2.
1. Remove the interior assembly from its packaging and verify that all parts are
present, as given in the parts list.
2. Remove the 8 screws (600A and 800A panels) securing the dead front to
panelboard interior. Lift off the dead front and place it and the screws aside.