GE Industrial Solutions Record Plus Wire Connector Lug Kits: FC100, FB100 - Manual

DEH40532 Installation Instructions
g
Record Plus™
Molded Case Circuit Breaker
Accessories
Wire Connector Kit
Congratulations and thank you for choosing the
Record Plus™
family of current-limiting circuit
breakers. This UL-listed lug connector kit is suitable
for use with the FB100 & FC100 circuit breaker series.
Record Plus™
circuit breakers are designed with a
full line of integrated accessories. All units use the
latest in integrated modular circuit breaker
technology for flexibility in application and
maximizing the product’s utilization and
capabilities.
Record Plus™
circuit breakers are all listed by
Underwriters Laboratories to the UL489 standard
and may be listed to CSA Standard C22.2, No. 5
and IEC60947-2
They can also be used with our molded case switches,
which are listed per Underwriters Laboratories to
the UL489 standard.
Record Plus™ circuit breakers and their accessories
are designed and manufactured to exceed our global
customers’ high standards for reliability and quality.
Warning: DANGER of electrical shock or injury.
Ensure ALL electrical power supplies are OFF before
installing or removing any devices. Do not remove
circuit protective devices until the power is turned
OFF. The breaker, trip unit, or accessories MUST
ONLY be installed and serviced by QUALIFIED
personnel. See NEMA publication AB4.
Avertissement: Danger contre les risques
d'électrocutions. S'assurer avant TOUTES
manipulations du disjoncteur que les différentes
sources d'alimentation sont en position OFF. Les
disjoncteurs, unités de protection, ou accessoires
doivent être installés par des personnes qualifiées et
habilitées. Ne pas retirer l’appariel de protection
avant que l’alimentation soit coupée. Lira NEMA
publication AB4.
Figure 1. Lug kits installed on Record Plus™ FC100 circuit breaker.
Product Description
These instructions describe the installation procedure for
the wire connector accessory on Record Plus™
FC100/FB100 circuit breakers, as shown in Figure 1.
The wire connector kits are available in five variants:
Catalog No. Wire
FCAL12/FCALK12 #14 - 10 AWG Cu/Al
FCAL13/FCALK13 #10 - 4 AWG Cu/Al
FCAL14/FCALK14 #4 - 1/0 AWG Cu/Al
FCO13/FCOLK13 #10 - 4 AWG Cu
FCO14/FCOLK14 #4 - 1/0 AWG Cu
Table 1. List of accessory lug kits.
The catalog numbers with “K” (e.g. FCALK12) contain
three (3) wire connectors. The catalog numbers without a
“K” (e.g. FCAL12) contains one (1) wire connector. The
parts are illustrated in Figure 2 and 3. Numbers in
brackets in the text and the figures refer to the item
numbers in Table 2.