GE Industrial Solutions Spectra Series Power Panelboards - Manual

g
Spectra Series™ Power Panelboards
Circuit Breaker Cover Kit
Catalog Number
AMCB6TEDL
Application
For use with circuit breaker type TED136 and current limiter
TEDL36 (015, 020, 030, 060, 100).
Installation
WARNING: Danger of electrical shock or injury.
Turn
OFF power ahead of the panelboard or
switchboard before working inside the equipment or
removing any component
. Equipment is to be
installed and maintained by properly trained and
qualified personnel only.
In the following instructions and figures, numbers in brackets
refer to the items in Table 1.
1. Confirm the contents of the kit. These kits are for
assembling fillers for TED6-frame Spectra circuit breakers
with TEDL current limiter on Spectra APNB bolt-on style
interiors. The vertical space required is 4.125 in. (3X).
The kit contains parts for 36W, 40W, and 44W
panelboards and 40W and 45W switchboards. Choose the
appropriate filler from the kit by matching its width with
the width of the existing fillers. Discard the other filler.
Figure 1 shows all the parts included in this kit, which are
listed in Table 1.
Item Description Part # Qty.
1
#CM 36, 40W TEDL DB 3X
Filler
168D1930P3 1
2
#CM 44, 45W TEDL DB 3X
Filler
168D1930P4 1
3 Cover support 3X 208C1850P3 2
4 Barrier center 252B1667P1 1
5 Spacer plate TED6 w/TEDL 252B2056P8 1
6 Steel drive rivet #10 x 1 / 2 " 331A3329P2 2
7
Thread-forming screw,
10-32 x 3 / 8 "
N722EP16006B6 2
8 Instruction sheet DEH40392 1
Table 1. Parts list for kit AMCB6TEDL.
Figure 1. Parts Included In the circuit breaker filler kit AMCB6TEDL.
DEH40392 Installation Instructions R01