GE Industrial Solutions Spectra Series Power Panelboards AMCB6TEDL - Manual

g
Spectra Series™ Power Panelboards
Bolt-On Circuit Breaker Kit
Catalog Numbers
AMCB6TEDL
Application
For use with circuit breaker type TED136 and current limiter
TEDL36 (015, 020, 030, 060, 100).
For Use with Circuit Breaker Cover Kit Catalog Number
AFP3TED.
Replacement Hardware Kit Number AHKBTEDL1.
Installation
WARNING: Danger of electrical shock or injury.
Turn
OFF power ahead of the panelboard or
switchboard before working inside the equipment or
removing any component
. Equipment is to be
installed and maintained by properly trained and
qualified personnel only.
In the following instructions and figures, numbers in brackets
refer to the items in Table 1.
1. Confirm the contents of the kit. This kit is used to install a
TED-frame SPECTRA branch circuit breaker with a TEDL
current limiter into a SPECTRA APNB bolt-on style interior.
The vertical space required for each kit is 4.125 inch (3X).
Refer to instruction sheet GEH-4671, supplied with the
TEDL current limiter, for installation of the current limiter to
the breaker. Figure 1 shows all the parts included in this kit,
which are listed in Table 1.
Item Description Part # Qty.
1
Thread-forming screw,
10-32 x 7/16"
192A6976P189 4
2
Circuit breaker and current
limiter mounting bracket
252B3573P3 2
3 Antiturn clip 252B3613P1 3
4 A & C phase strap 252B3618G1 2
5 A & C phase strap 252B3618G2 2
6 B phase strap 252B3618G3 2
7 Cupwasher, #8254V644P1 8
8
Shakeproof screw,
#10-32 x 1 / 2 "
264V291P3 6
9 Screw, #8-32 x 3 1 / 8 " 264V322P2 8
10 Conical spring washer, 1 / 8 " 75A105503P101 3
11 Instruction sheet DEH40386 1
12 Nut, 1 / 4 -20 N245P21B6 3
13 Carriage bolt, 1 / 4 -20 x 1 1 / 2 " N657P21024B6 3
Table 1. Parts list for kit AMCB6TEDL.
Figure 1. Parts included in the circuit breaker mounting kit AMCB6TEDL.
DEH40386 Installation Instructions R02