beautypg.com

Imagination at work – GE Industrial Solutions WattStation Wall Mount Hardwired Version User Manual

Page 2

background image

Step 4: Remove the oval snap-fit ring to access the cover

hardware. Take off front cover and the deadfront shield.

GE Energy

41 Woodford Avenue

Plainville, CT 06062

www.geindustrial.com
© 2011 GE Company

imagination at work

DET-752 (07/11)

STEP 5 and Step 6 (HW)

STEP 4 (HW)

STEP 4 (HW)

Continued

Snap-fit Ring

Cover

Deadfront

Shield

WattStation

Step 5: Remove the wire pigtail from the line side

of field wiring block and discard.

Step 6: Feed the supply power and ground wires through

WattStation enclosure holes. Slide WattStation onto the

mounting bracket, ensuring that the opening in the back

plate bracket aligns with the tab on the wall mount bracket

Step 7: Connect supply power wires to line side of fuse block

and ground wire to the ground bar

Step 8: Replace the deadfront shield, the front cover with

the provided hardware and the oval snap-fit ring.

WattStation

TM

is a trademark of General Electric Company.