3 save and reboot – SENA LS110 User Manual
Page 58
58
5. Save changes
6. Exit without reboot
7. Save and reboot
---> 6
Exit configuration program... Bye...
LS110 login :
Figure 7-2 Exit without reboot
7.3 Save And Reboot
With ‘Save and reboot’ menu, the LS110 will be rebooted immediately. Changed parameter values will
be applied when the LS110 is up again. Command usage of ‘Save and reboot’ is as follows:
-----------------------------------------------------------------------------
Welcome to LS110 Configuration Page
Serial No. :
MAC Address
: 00:01:95:AF:BD:44
F/W REV.
: v0.4.8
IP Mode
: Static IP
IP Address
: 192.168.161.5
-----------------------------------------------------------------------------
Console#1 (Serial) : Connected
Console#2 (Telnet) : Available
Console#3 (Telnet) : Available
-----------------------------------------------------------------------------
1. IP configuration
2. Serial port configuration
3. System information
4. System administration
5. Save changes
6. Exit without reboot
7. Save and reboot
---> 7
Rebooting system now...
LS110 login :
Figure 7-3 Save and reboot
If you want to apply changed values to system, you must execute both ‘save’ and ‘reboot’ process.