2 username, 3 password – SENA LS110 User Manual

Page 51

6.2 Username

Using ‘Username’ menu, you can change username. The usage is as follows.

-------------------------------------------------------------------------------

System administration

-------------------------------------------------------------------------------
1. Device name : LS110
2. Username : root
3. Password : root
4. Factory reset
5. Factory reset without IP settings
6. Firmware upgrade
7. Ping
8. User connection status
9. Telnet configuration enable/disable : Enable

Back, Refresh

---> 2

Enter new username : root
Enter current password : ****
Username changed.

Figure 6-3 Username Screen

6.3 Password

Using ‘Password’ menu, you can change login password. The usage is as follows.

-------------------------------------------------------------------------------

System administration

Back, Refresh

---> 3

Enter new password : ****
Confirm new password : ****
Enter current password : ****
Password changed.

Figure 6-4 Password Screen