Ocean Optics HR2000+ Install - Manual (Page 28)

B: HR2000+ Specifications
22 294-00000-000-02-201012
Specification Value
Entrance aperture 5, 10, 25, 50, 100 or 200 µm wide slits
Order-sorting filters Installed longpass and bandpass filters
Focal length f/4, 101 mm
Optical resolution Depends on grating and size of entrance aperture
Stray light <0.05% at 600 nm; <0.10% at 435 nm
Dynamic range 2 x 10 8 (system); 1300:1 for a single acquisition
Fiber optic connector SMA 905 to single-strand optical fiber (0.22 NA)
Data transfer rate:
USB 2.0 Port
Serial Port
Full scans into memory every 1 millisecond
Full scans into memory every 600 milliseconds
Integration time 1 ms to 65 seconds
Interfaces
USB 2.0, 480 Mbps (USB 1.1 compatible); RS-232 (2-wire); SPI
(3-wire); I
2 C Inter-Integrated Circuit 2-wire serial bus
Operating systems:
USB Port
Serial Port
Windows 2000/XP, Mac OS X, and Linux
Any 32-bit Windows operating system
Onboard GPIO 10 user-programmable digital I/Os
Analog channels One 13-bit analog input and one 9-bit analog output
System Compatibility
The following sections provide information on hardware and software requirements for the HR2000+.
Compatibility for Desktop or Notebook PCs
To use the HR2000+, you must have a PC that meets the following minimum requirements:
 Operating systems: Windows 2000/XP, Mac OS X, or Linux with USB port; any 32-bit or 64-bit
Windows OS with serial port
 Computer interfaces: USB 2.0 @ 480 Mbps; RS-232 (2-wire) @ 115.2 K baud
 Peripheral interfaces: I
2 C inter-integrated circuit