QTECH SmartEdge 100 PPP and PPPoE User Manual
Configuring ppp and pppoe
This manual is related to the following products:
Table of contents
Document Outline
- toc
- 1 Overview
- 2 Multilink PPP
- 3 Configuration Tasks
- 3.1 Configuring PPP
- 3.1.1 Configure PPP Global Attributes
- 3.1.2 Configure a PPP-Encapsulated Port
- 3.1.3 Configure a PPP-Encapsulated ATM PVC
- 3.1.4 Configure a Subscriber Record for PPP
- 3.1.5 Configure an Interface for Static PPP Peer Router IP Addre
- 3.1.6 Configure MLPPP on ATM PVCs
- 3.1.7 Example: MLPPP Configuration on ATM PVCs
- 3.1.8 Configure MLPPP for L2TP Subscribers
- 3.1.9 Example: MLPPP Configuration for L2TP Subscribers
- 3.2 Configuring PPPoE
- 3.2.1 Configure PPPoE Global and 802.1Q Profile Attributes
- 3.2.2 Configure a PPPoE-Encapsulated Ethernet Port
- 3.2.3 Configure a PPPoE-Encapsulated ATM PVC
- 3.2.4 Configure a PPPoE-Encapsulated 802.1Q PVC
- 3.2.5 Configure a PPPoE-Encapsulated Child Circuit on an ATM PVC
- 3.2.6 Configure a PPPoE-Encapsulated Child Circuit on an 802.1Q
- 3.2.7 Configure a Subscriber Record for PPPoE
- 3.2.8 Configure IPCP Netmask Negotiation
- 3.2.9 Configure MLPPP over PPPoE
- 3.2.10 Example: MLPPP Configuration on PPPoE
- 3.1 Configuring PPP
- 4 Operations Tasks
- 5 Configuration Examples