Dexter Laundry T-80 Reversing (On-Premise) - Manual (Page 3)

3
TABLE OF CONTENTS
DRYER DIMENSIONS (Figure 1) 4
UNCRATING
5
DRYER
INSTALLATION 5
DRYER EXHAUST SYSTEM (Figure 2)
8
DRYER
SHUTDOWN 9
TOUCH
PAD LAYOUT (Figure 3) 10
DRYER
DEFAULT SETTINGS 11
DRYER
FAULT CODES 11
TOUCH
PAD DESCRIPTION 12
OPERATING INSTRUCTIONS 15
PROGRAMMING
INSTRUCTIONS 17
SERVICING DRYER
25
PREVENTATIVE
MAINTENANCE 25
WARNINGS ABOUT USE AND OPERATION
It is ABSOLUTELY ESSENTIAL that the dryer be grounded to a known earth (zero) ground.
This is not only for personal safety, but is necessary for proper operation.
THIS DRYER IS EQUIPPED WITH AN OVER-TEMPERATURE THERMOSTAT
located on the lower left side on the back of the dryer. Should the dryer cease to operate, refer to
your “Service Procedure and Parts Data” book for instructions.
CHECK THIS THERMOSTAT WHEN INSTALLING DRYER to assure it is not tripped.
Impacts, such as rough handling in shipment, may trip the thermostat.