Dexter Laundry T-80 Reversing (On-Premise) - Manual (Page 21)

21
numeric display is not flashing. The SELECT/ENTER key on the dryer controller touch pad
can be pressed and released to enter the flashing value shown on the 4-digit numeric display and
allow you to escape.
___________________________________________________________________
PROCEDURE
1) Make sure the dryer is not in a dry cycle. The 4-digit numeric display on the dryer controller
will show “LOAd” when the dryer is not in a dry cycle.
2) Press and release the PROG key on the dryer controller touch pad.
3) Press and release the UP arrow key on the dryer controller touch pad. The programming
L.E.D. will illuminate and the 4-digit numeric display on the dryer controller will change to
“Prog”.
4) Press and release the UP or DOWN arrow keys to choose the dry cycle you want to change
(dry cycle 1 through 5). The dry cycle L.E.D. will illuminate to indicate which dry cycle you
are choosing. If you press either arrow key and hold it down, the controller will sequence
through the five dry cycles.
5) Press and release the SELECT/ENTER key once you have chosen the dry cycle you want to
change. After you press this key, the dry time L.E.D. will illuminate. The dry cycle L.E.D.
and the programming L.E.D. will remain illuminated. The total dry time will also be
displayed on the 4-digit numeric display.
6) Press and release the UP or DOWN arrow keys to change the total cycle time. Once either
of the arrow keys is pressed, the dry time L.E.D. and the total dry time on the 4-digit numeric
display will flash. If you press and hold either arrow key down, you will increment (UP
arrow) or decrement (DOWN arrow) through the total dry times available (1 through 60
minutes). This displayed dry time includes the cool down time along with the heated time.
To not change the total dry time, do not press the arrow keys. Go to the next step.
7) Press and release the SELECT/ENTER key. Once this key is pressed and released, the dry
time L.E.D. will switch off, the dry cycle L.E.D. and programming L.E.D. will remain on,
and the temperature L.E.D. will illuminate. The drying temperature will also be shown on
the 4-digit numeric display.
8) Press and release the UP or DOWN arrow keys to change the drying temperature. Each
press and release of the arrow keys will either increase or decrease the temperature by five
degrees Fahrenheit or three degrees Celsius, depending on how your dryer controller is set
up. Once either of the arrow keys is pressed, the temperature L.E.D. and the drying
temperature on the 4-digit numeric display will flash. If you press and hold either arrow key
down, you will increment (UP arrow) or decrement (DOWN arrow) your way through the
available drying temperatures (105
O
Fahrenheit or 41
O
Celsius, up to 195
O
Fahrenheit or 90
O
Celsius). If you do not want to change the drying temperature, do not press the arrow keys.