Dexter Laundry T-80 Reversing (On-Premise) - Manual (Page 13)

13
Description
This touch pad switch will select one of the three variable
parts of the dry cycle (dry time, temperature, or cool down)
by sequencing through them. Once one of the variable
Select/Enter parts of the dry cycle is chosen and changed, this touch pad
switch will enter the new (changed) value into the dry cycle
program.
This touch pad switch allows the dryer controller to enter
the temporary programming mode.
Cycle
This touch pad switch will stop the dryer during a dry cycle
without clearing the present drying cycle if pressed once. If
pressed and released twice, consecutively, the present dry
Stop cycle will be cleared.
This touch pad switch will start the operation of a dry cycle
if pressed and released once. Pressing and holding this
touch pad switch will display the current temperature of the
Start dryer heat sensor as long as it is held in the depressed
position.
4-DIGIT NUMERICAL DISPLAY MESSAGES
Message
Description
LOAd
This message is displayed after a dry cycle is complete and
the dryer loading door has been opened or the STOP touch
pad key on the dryer controller has been pressed and
released twice.
donE
This message blinks immediately after completion of the
dry cycle and continues to blink until the stop key on the
dryer controller touch pad is pressed or the dryer loading
door is opened.