3B Scientific 3B NETlog™ with Ethernet Port (230 V, 50__60 Hz) User Manual
Page 16

3B Scientific GmbH • Rudorffweg 8 • 21031 Hamburg • Germany •
www.3bscientific.com
Subject to technical amendments
© Copyright 2010 3B Scientific GmbH
13. Format of exported files
Exported files have the following format (the words shown here between the delimiters <> are simply place-
holders for actual data. Entries are separated by tab characters. Depending on the settings, some columns may
be omitted):
#
Index (tab) Absolute date/time (tab) Relative time (tab)
(tab)
D(return)
1(tab)
2(tab)
etc.
14. Faults and possible remedies
Fault
Cause
Remedy
The 3B NET-
log™ device
cannot be
switched on
when operat-
ing with bat-
teries
The batteries
are worn out.
Replace with
new batteries or
use the power
supply unit.
When the
“Test” button
in the
3B NETlab™
software is
activated, the
“Connected”
message does
not appear.
The 3B
NET-
log™ device is
not switched
on.
There is no
connection
between the
computer and
the
3B NETlog™
equipment.
Switch on the
3B NETlog™ de-
vice.
Check the con-
nection between
the computer
and 3B NETlog™
device. Press
“Test” again
and, if neces-
sary, refresh by
pressing F5.
15. Support
If you have any queries and/or suggestions, please
feel free to contact our support team:
Email:
Internet:
http://www.3bnetlog.com/
16. The CE marking
3B NETlog™ conforms to the requirements of these
EU specifications
•
EN 61010-1: Protoype-tested
•
EN 61326-1: Tested for noise immunity and
interference
Conformity with EU guidelines is indicated by the
CE marking on the device.
17. Licence
3B Netlog™ and 3B Netlab™ are registered trade-
marks of 3B Scientific GmbH in Germany and other
countries.
The 3B Netlab™ computer program is protected by
worldwide copyright. It may be used exclusively for
educational purposes in schools and educational
institutions, including preparatory purposes at
home. The fabrication of copies, unauthorised
application or unauthorised sale is strictly prohib-
ited.