Driverack, Appendix a, A.3 specifications – dbx DriveRack 260 User Manual
Page 75: Appendix
DriveRack
®
67
DriveRack® User Manual
A.3 Specifications
Analog Inputs:
Number of Inputs:
(2) Line inputs. (1) RTA Mic input
Connectors:
(2) Female XLR line inputs, XLR RTA Mic input
Type:
Electronically balanced/RF filtered
Impedance:
> 40k Ω
Max input line level:
+30dBu with input jumpers in +30 position (+22dBu from factory)
CMRR:
>
45dB
RTA Mic Phantom Voltage:
+15VDC
RTA Mic EIN:
<-110 dBu, 22 Hz - 22 kHz, 150 ohm
Analog Outputs:
Number of Outputs:
(6) Line Outputs
Connectors:
Male XLR
Type:
Electronically balanced, RF filtered
Impedance:
120 ohms
Max Output Level:
+22dBu
Alignment Delay:
Total of 2.7 seconds available for allocation amongst all delay modules (1.3 seconds maximum delay time)
A/D Performance:
Type:
dbx Type IV conversion system
Dynamic Range:
>107 dB unweighted, >110 dB A-weighted
Type IV dynamic range:
123 dB with transient material, A-weighted, 22kHz BW 121 dB with transient material, unweighted, 22kHz BW 115
dB typical with program material, A-weighted, 22kHz BW
Sample Rate:
48kHz
D/A Performance:
Dynamic Range:
112 dB A-weighted, 110dB unweighted
System Performance:
Dynamic Range:
110 dB unweighted, >107dB weighted,
THD+N:
0.002% typical at +4dBu, 1kHz, 0dB input gain
Frequency Response:
20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk:
>110dB, 120dB typical
Crosstalk input to output:
>100dB
Power Supply:
Operating Voltage:
Domestic Model: 100-120VAC 50/60 Hz - EU Model: 220-240 VAC 56/60 Hz,
Power Requirements:
25 Watts
Physical:
Weight:
5.5 lbs.(2.5 kg) Shipping weight 7 lbs. (3.18 kg)
Dimensions:
1.75” H x 5.75” D x 19” W
Appendix A
Appendix