Derale Performance Single Right 1_2" NPT Port Filter Mount with 3__4-16 Filter Threads" - Manual

INSTALLATION INSTRUCTIONS
OIL FILTER RELOCATION MOUNT
PART # 25751 & 25753
Please read these instructions completely before beginning installation
FILTER MOUNT INSTALLATION
VEHICLE TESTING
1. Choose a convenient location for the Ports-Right Filter
Mount. Make sure there is enough space for future servicing
of the oil filter. Suggested Locations: Firewall, Radiator
Support, Fender well.
2. Take the Filter Nipple supplied, making sure the shorter end
of threads is installed onto the Ports-Right Filter Mount.
(See Diagram #1)
3. Using the filter mount as a template, mark and drill three
3/16” holes.
3. Using #14 Sheet Metal Screws (Not Included), install the
Ports-Right Filter Mount onto the vehicle.
4. Using Teflon Tape or a suitable sealant install Fittings
(Not Included) to In/Out ports.
Do not over torque Fittings.
5. Carefully route hose over to the Ports-Right Filter Mount.
Keep hoses away from sharp edges, moving parts
and exhaust. Do not bend hose sharper than a 5” radius.
6. Apply a light coat of oil onto the o-ring of your new oil filter
and install on the filter mount.
Warning:
Note:
1. Start the engine and quickly check all connections for leaks.
2. Turn-off the engine and check the oil.
3. Add oil as needed.
TOOLS NEEDED
Drill
3/16” Drill Bit
Teflon Tape
KIT CONTENTS
QTY. DESCRIPTION
1 Ports Right Filter Mount
1 Filter Nipple
Diagram #1
IMPORTANT
This Filter Mount is machined with 3/8”
or 1/2” NPT Ports and requires Teflon
Tape or a suitable sealant. Be sure not
to over Fittings.
25751-25753-InstructionSheet
Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com
Warning: Installation of accessories should only be undertaken by those with mechanical knowledge and are familiar with working on
vehicles. Always use eye protection (goggles, safety glasses or shield). Park the vehicle in a well lit area, on level ground and apply the
parking brake. Only work on a cold vehicle that has been sitting overnight, failure to do so will result in severe burns and injury. Before starting
the vehicle, make sure no tools or any other items are left under hood that could interfere with or be drawn into moving parts of the engine.
Failure to follow instructions can lead to severe damage and personal injury.
Fittings
(Not Included)
Oil Filter
(Not Included)
Filter
Nipple
Ports Right
Filter Mount