Derale Performance Universal Thermostatic Sandwich Adapter with 3__8" NPT Ports - Manual

25702-InstructionSheet
Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com
INSTALLATION INSTRUCTIONS
ENGINE SANDWICH ADAPATER KIT
PART # 25702
KIT CONTENTS
QTY. DESCRIPTION
1 Sandwich Adapter
1 2 3/4” O-ring
1 3/4-16 Sleeve Nut (Yellow)
1 18mm Sleeve Nut (White)
1 20mm Sleeve Nut (Black)
1 22mm Sleeve Nut (Green)
1 13/16-16 Sleeve Nut (Blue)
TOOLS NEEDED
Standard Screw Driver or
5/16” Nut Driver
Dyke Pliers
Torque Wrench
11/16” Open End Wrench
1 1/8” Socket
Teflon Tape
Please read these instructions completely before starting the installation.
IMPORTANT
In most cases the Factory Oil Filter will work with the supplied sandwich
adapter. In some applications where the frame or exhaust system interferes
with the new filter depth we recommend using a shorter filter length.
See chart below for possible filter options.
IMPORTANT
This kit is designed to fit all vehicles with engine block
oil filter landings measuring 2 3/4” diameter. For
vehicles with 2 1/2” oil filter landings, please visit
www.derale.com for alternative Sandwich Adapter Kits.
Diagram #2
Option 1
‘O’Ring
Sandwich
Adapter
Sleeve
Nut
Brass
Fittings
Oil
Lines
Hose
Clamps
To Oil
Cooler
From Oil
Cooler
SELECTING COMPONENTS
The components supplied in this kit are for multiple applications. Some
components will not be used for your specific application. To easily select
the correct components for your application, follow the steps below. Then
proceed to the SANDWICH ADAPTER INSTALLATION section.
1. Remove the factory oil filter from the vehicle.
2. Using a rag, clean the oil filter landing on the engine.
3. Take the supplied Sandwich Adapter and hold it up the oil filter landing
on the engine block. The casting needs to seat directly onto the landing
without obstruction. (See Diagram #2)
(See Diagram #1)
1. Using the 5 supplied Sleeve Nuts, try and screw each Sleeve Nut onto
the filter nipple on the engine block until the correct size will completely
thread onto the nipple. Once you have located the correct Sleeve Nut,
disregard the remaining 4 Sleeve Nuts.
Selecting the Sandwich Adapter
Selecting the Sleeve Nut
There are 5 supplied Sleeve Nuts in this kit. Only 1 Sleeve Nut will
be used for your application.
For reference purposes Sleeve Nuts are color coded. Note:
SLEEVE NUT
Colored Label
Diagram #1
(Continues on Page 2)
FRAM WIX FRAM WIX
THREAD LABEL FILTER FRAM FILTER WIX FILTER FRAM FILTER WIX
SIZE COLOR HEIGHT P/N HEIGHT P/N HEIGHT P/N HEIGHT P/N
3/4-16 YELLOW
13/16-16 BLUE
18mm x 1.5 WHITE
20mm x 1.5 BLACK
22mm x 1.5 GREEN
4.92 PH3600 4.83 51516 3.34 PH3614 3.4 51348
4.94 PH3429 4.83 51045 3.36 Ph3506 3.4 51042
4.94 PH3980 4.83 51036 3.36 PH3387A 3.4 51040
3.47 PH7317 N/A N/A 3.39 PH3593A 3.14 51381
4.94 PH3750 4.57 57026 3.98 PH2 3.43 57060