beautypg.com

Derale Performance Standard Engine Spin On Adapter with 1_2" NPT Ports, 22x1.5mm Filter Thread User Manual

Diagram #2, Diagram #1

background image

15703-15704-15706-15724-InstructionSheet

INSTALLATION INSTRUCTIONS

ENGINE SPIN-ON ADAPTER KIT

PART # 15703, 15704, 15706 & 15724

Derale Performance, Los Angeles, CA

800.421.6288 www.derale.com

Please read these instructions completely before beginning installation

INSTALLATION

VEHICLE TESTING

1.

Remove the factory oil filter and clean the oil filter landing
surface on the engine block.

4.

Apply a light coat of oil onto the O-ring.

5.

Take the O-ring and install into the groove on the Spin-On
Adapter.

6.

Install onto the engine. (See Diagram #2)

7.

Hand Tighten with the same force used in tightening a factory
oil filter.

When routing hoses, be sure to keep all hoses away from

sharp edges, moving parts and hot engine components.
Hoses should be routed carefully and should not be bent
in less than a 5” radius.

A kinked hose will restrict flow and could cause engine

failure.

1.

Start the engine and quickly check all connections for leaks.

2.

Turn-off the engine and check the oil.

3.

Add oil as needed.

Warning:

Important:

2. Take the Hex Sleeve Nut and slide it into the Spin-on Adapters

hex feature. Sleeve Nut will only install correctly in one direction.
(See Diagram #1)

3. Take the supplied Snap Ring and carefully install into the snap

ring groove of the casting making sure it is securely fastened.
(See Diagram #1)

Warning: Installation of accessories should only be undertaken by those with mechanical knowledge and are familiar with working on
vehicles. Always use eye protection (goggles, safety glasses or shield). Park the vehicle in a well lit area, on level ground and apply the
parking brake. Only work on a cold vehicle that has been sitting overnight, failure to do so will result in severe burns and injury. Before starting
the vehicle, make sure no tools or any other items are left under hood that could interfere with or be drawn into moving parts of the engine.
Failure to follow instructions can lead to severe damage and personal injury.

TOOLS NEEDED

Open End Wrenches
Oil Filter Wrench

KIT CONTENTS

QTY. DESCRIPTION

1

Spin-On Adapter

1

O-ring

1

Hex Sleeve Nut

1

Snap Ring

PART #

THREAD SIZE

15703
15704
15706
15724

3/4”-16

18mm x 1.5
20
22

mm x 1.5
mm x 1.5

The purpose of a Spin-on Adapter is to provide external
oil lines for remote filter mounts and oil coolers.

Spin-On

Adapter

Spin-On

Adapter

O-ring

Diagram #2

1/2” NPT x 1/2”

Hose Barb

(Not Included)

1/2”Hose

1/2” Hose

Diagram #1

Snap

Ring

Hex Sleeve

Nut

Snap Ring

Groove