GE P&W E-Series Reverse Osmosis - E8 Series 60 Hz - Manual

Fact Sheet
Find a contact near you by visiting www.gewater.com and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2013, General Electric Company. All rights reserved.
FS1129EN.doc Jul-13
E8 Series 60 Hz
Reverse Osmosis Machine 57,000 to 144,000 gallons per day
Figure 1: E8 Series 60 Hz
When you mention reverse osmosis (RO), GE’s Water
& Process Technologies is the first name to come to
mind. Our E-series RO machines (Figure 1) are de-
signed for durable operation, high quality product
water production, easy installation and straightforward
control.
General Properties
Typical Applications
 Process ingredient water
 Safe drinking water
 Boiler feed water
 Ion exchange pre-treatment
Standard Economy Features
 Energy saving 400 ft 2 (37.2 m 2 ) membrane
elements
 SS high-pressure piping
 1-micron pre-filter and SS housing
 Automatic inlet shut-off valve
 AccuTrak* RO microprocessor controller
-
Permeate and concentrate paddlewheel flow
sensors
-
Permeate conductivity sensor
-
Permeate tank level monitoring
-
SD card for collection of operating data
-
ALARMS: Low inlet pressure, high temperature,
high permeate conductivity, motor fault, and
fill-time exceeded
-
Remote machine on/off capability
 Feed water flush on shut down
 Panel-mounted pre-filter, post-filter, primary, and
final pressure gauges
Deluxe (DLX) Features – in addition to ECN
features
 Inlet pH sensor
 Chemical dosing pump for antiscalant dosing or pH
adjustment
 Clean-In-Place pump plumbed, wired and mount-
ed; remote tank
 ALARMS: Same as above plus high/low inlet pH,
high permeate pressure
Table 1: Operating Parameters
Operating Pressure 200-250 psig (13.8-
17.2 bar)
Maximum Recovery 75%
Nominal Rejection 95-98%
Operating Temperature 55-85  F (13-30  C)
Minimum Inlet Pressure 30 psig (2 bar)
Design Temperature 77  F (25  C)