GE P&W Service Deionization (SDI) - UHP-360 - Manual

Fact Sheet
Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2010, General Electric Company. All rights reserved.
FS1149EN.doc Apr-10
UHP-360
High Purity Deionization Unit for Point-Of-Use Applications
Figure 1: GE UHP-360
The GE UHP-360 provides a reliable supply of high
purity water in a small, efficient package. These sys-
tems meet the needs of customers requiring a small
volume of deionized water. Since many small-
volume water users also have critical space limita-
tions, each GE UHP-360 system arrives pre-piped
and pre-wired for easy installation. All major com-
ponents of the system are mounted on a structural
steel frame. Portable ion-exchange columns utilize
hose connections that further ease installation and
service of the UHP-360.
The UHP-360 has just three hard piping connec-
tions. Makeup and polish piping is constructed of
solvent-welded, schedule 80 PVC and the unit’s
electrical connection consists of 120-Volt power
and signal from the storage tank. Standard configu-
rations produce up to 12 gpm (57 lpm) of
18.2-megohm of ultra-high purity water with an
option up to 24 gpm (90 lpm).
A warning light provides a visual indication of the
makeup column effluent quality. A recirculating
polishing loop, pressurized by a stainless steel cen-
trifugal pump, provides a continuous supply of ul-
tra-high purity water to the customer’s in-house
loop. An integral backpressure regulator maintains
this supply at a constant pressure.
Bacteria are controlled by a 25nm UV disinfection
unit. Bacteria and other particulates are then
trapped in the polishing postfilter, a 0.2 micron
absolute cartridge made of polypropylene media.
System effluent quality is continuously monitored
on a temperature compensated resistivity monitor
which is rack-mounted. Stainless steel pressure
gauges are provided throughout to monitor pres-
sures at all points within the UHP-360.
GE UHP-360 is a robust system that can be custom-
ized to meet a wide variety of applications.
Whether you are struggling to find more water to
hookup a new tool, or you simply need high purity
water for a rinsing station, the UHP-360 is the per-
fect choice for hundreds of point-of-use applications.
Contact GE to see how an UHP-360 can be
incorporated into your system.