GE P&W E-Series S - Manual

Fact Sheet
Find a contact near you by visiting www.gewater.com and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2013, General Electric Company. All rights reserved.
FS1292EN.doc Jul-13
E-Series S
Small Reverse Osmosis Machines, 200 to 300 liters per hour
Figure 1: E2 CE Series
When you mention reverse osmosis (RO), GE Water
& Process Technologies is the first name to come
to mind. Our E-series RO machines (Figure 1) are
designed for durable operation, high quality prod-
uct water production, easy installation and straight-
forward control.
General Properties
Typical Applications
 Process ingredient water
 Rinse water
 Food ingredient water
 Safe drinking water
 Boiler feed water
 Ion exchange pre-treatment
Standard Features
 Polypropylene frame
 5-micron pre-filter
 Automatic inlet shut-off valve
 Permeate and Concentrate flow meters
 Pre/post-filter, and primary pressure gauges
 Digital conductivity meter with temperature
sensor
 Ball valves for regulation of pressure and con-
centrate flow
 Microprocessor control panel with one potential
free contact for remote alarm, dosing pump or
level control for permeate tank
Table 1: Operating Parameters
Average Operating Pressure 7–15 bars
Recovery 65-75%
Nominal Rejection 90-95%
Operating Temperature 5-35  C
Inlet Pressure 3-6 bars
Design Temperature* 15  C
* Varying the operating temperature will affect machine productivity
Table 2: Materials of Construction
Frame Polypropylene
Membrane Elements AK2540TM (E2-CE-200-S)
AK4040TM (E4-CE-300-S)
Membrane Housing Fiberglass Reinforced Plastic
Piping PN 16
Cartridge Filter Hytrex*, 5 micron