beautypg.com

GE P&W Pleated Filters - Flotrex AP Pleated Filters User Manual

Flotrex* ap, Description and use, Typical applications

background image

Fact Sheet

Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”.

* Trademark of General Electric Company; may be registered in one or more countries.

©2009, General Electric Company. All rights reserved.

FS1079EN Jan-09

Flotrex* AP

Pleated Filters with Polypropylene Microfiber Media

Figure 1 : Flotrex AP Filters

Description and Use

Constructed with gradient density thermally-
bonded polypropylene microfiber media, absolute-
rated Flotrex AP (FAP) filters (Figure 1) combine
exceptional solids-holding capacities with precise
micron retention ratings. The FAP filters are con-
structed of FDA acceptable high-purity polypropylene.

FAP filters are absolute-rated for air, gas and liquid
filtration with low pressure drop across the wide
range of 0.65 to 40 microns. Sheets of melt-blown
media are layered to provide absolute particle
retention, high solids loading and long service life.

Typical Applications

Typical Flotrex AP filtration applications include:
• Prefiltration and Final Chemical Filtration –

broad chemical compatibility

• Prefiltration of Pharmaceuticals and Biological

Fluids – dependable protection for final filters

• High Throughput for Beer Filtration

General Properties

Flotrex AP filters are available the following abso-
lute pore size micron ratings: 0.65, 1, 2, 3, 5, 10, 20
and 40 µm. Tables 1, 2, 3, 4 and 5 show further de-
tails on materials of construction, dimensions, op-
erational limits and flow performance in air

and water.

Table 1: Materials of Construction

Table 2: Dimensions

Table 3: Operational Limits

Table 4: Flow Performance in Clean Air

1