GE P&W SeaPRO Series 50 Hz, 45,000 ppm NaCL 500-1500 m3_day (100-300 gpm) - Manual

Fact Sheet
Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2009, General Electric Company. All rights reserved.
FS1018EN.doc Aug-09
SeaPRO Series 50 Hz
Seawater Desalination Machines
45,000 ppm NaCl 500-1500 m
3 /day (100-300 gpm)
Basic Features (BAS)
• GE Fanuc Quick Panel 6-inch color display. Pri-
marily text operating screens, Touchscreen con-
trols.
• GE Fanuc Micro VersaMax processor
• 4-20 mA instruments displayed on instrument
center
• Variable frequency drive (VFD) for high pressure
pump
• Motor starter for boost pump
• Stand alone master control enclosure, skid
mounted local control enclosure with terminal
strips
• Membrane/energy recovery device (ERD)/boost
pump and pump/prefilter located on separate
skids
Premium Features (PRE)
• GE Fanuc QuickPanel 12-inch color display.
Text and pictorial operating screens. Touch-
screen controls.
• GE Fanuc VersaMax processor
• 4-20 mA instruments on touchscreen
• Primary and final pressure transmitters
• Variable frequency drive (VFD) for high pres-
sure pump
• Motor starter for boost pump
• Automated valves and control for feed flush
upon shut down
• Stand alone master control enclosure, local
control enclosure with remote I/O
• Membrane/energy recovery device
(ERD)/boost pump and pump/prefilter located
on separate skids