GE P&W Service Deionization (SDI) - Apollo: I-Series User Manual

Apollo: i-series, Reverse osmosis water system, Standard equipment

Fact Sheet

Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”.

* Trademark of General Electric Company; may be registered in one or more countries.

FS1123EN Apr-10

Apollo: I-Series

Reverse Osmosis Water System

Figure 1: Apollo I-Series

Standard Equipment

• Stainless steel tamper resistant enclosure
• Fully automatic
• Solid state controller
• Tank level control
• Low feed pressure pump protection
• Stainless steel multi-stage RO pump
• Stainless steel pressure vessels
• Thin film composite membranes
• Automatic membrane flush system - maximizes

membrane performance and service life

• 5 micron prefilter cartridge
• Stainless steel, liquid -filled pressure gauges
• Product and reject water flow meters

Optional Equipment

• Carbon filter pretreatment
• Duplex water softener pretreatment
• Digital water quality monitor and alarm
• Polyethylene storage tank
• Stainless steel distribution pump

Feedwater Requirements

• SDI < 5
• Free chlorine = 0 ppm
• Saturation index ≤ 0

Table 1: Specifications

I-1440

I-2880

I-4320

I-5760

Gallons Per Day

/day)

1440

(5.5)

2880

(10.9)

4320

(16.4)

5760

(21.8)

Rejection Rate

≥ 97%

Operating

Pressure (PSI)

150 psi

Distribution – Pump Single

Phase, 60Hz

(120 VAC /10.4

Amps-220/VAC/5.2 Amps)

1 HP

RO Pump – Single Phase,

60Hz

(120 VAC/16.2 Amps-

220 /VAC / 8.1 Amps)

1 HP

Depth inches (cm)

22 (56)

Width inches (cm)

36 (91)

Height inches (cm)

60 (152)

Weight lbs (kg)

260 (118) 280 (127) 300 (136) 325 (147)

Note: Specifications subject to change without notice.

Contact Us

For more information on the Apollo-I Series contact
us at 1-800-446-8004, visit our website or contact
your GE representative.

Note: Product line manufactured by GE Mobile Water, Inc, 5900
Silver Creek Valley Rd, San Jose, CA 95138.

Table of contents

Document Outline

Apollo: I-Series