GE P&W Hydrogen Sulfide Scavengers - Steamate PAS6074 - Manual

Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2011, General Electric Company. All rights reserved.
FSbSteamatePAS6074_EN.doc Apr-11
Fact Sheet
Steamate* PAS6074
Total Boiler System Corrosion Inhibitor
 Unique blend of Polyamine and Neutralizing
amine corrosion inhibitors
 Protects feedwater, boiler and steam conden-
sate system surfaces against both carbonic acid
and dissolved oxygen corrosion
 Provides effective coverage of the entire steam
boiler system from a single feedwater injection
point
 Reduces chemical inventory and simplifies
treatment program monitoring & control
 Reduces total cost of ownership thru improved
corrosion control
Description and Use
Steamate* PAS6074 is a blend of a multifunctional,
volatile, amine corrosion inhibitor (the “Polyamine”
component), and a specific blend of neutralizing
amines selected for effective coverage of complex
steam distribution systems.
Steamate PAS6074 protects metal surfaces from
corrosion via multiple mechanisms. The volatile Pol-
yamine corrosion inhibitor forms a barrier film on all
metal surfaces. Thus, the deaerator, feedwater pip-
ing, boiler, steam piping and condensate return pip-
ing are all protected from oxygen and carbonic acid
corrosion. The product also contains a blend of
neutralizing amines, which can neutralize acidic
contaminants and elevate the pH of the condensate
into the mildly alkaline range, where the protective
metal oxides are most stable and adherent.
Improved corrosion control reduces the potential for
boiler tube failures by reducing the level of corrosion
product ingress from the steam condensate and
feedwater circuits, and the resulting metal oxide
deposition on internal boiler heat transfer surfac-
es. It also maintains optimum fuel-to-steam effi-
ciency by maintaining clean heat transfer
surfaces, and minimizes disruptive outages and
maintenance costs associated with corrosion-
related failures of steam condensate and feedwa-
ter piping, economizers, condensers and other
heat exchangers, steam traps and other associat-
ed equipment.
Typical Applications
Steamate PAS6074 is designed for application to
steam boilers. This technology is not approved for
use where the steam contacts food products or is
used for direct humidification of indoor air.
Treatment and Feeding Requirements
Feed Point – Steamate PAS6074 is designed to be
fed neat (undiluted) into the storage section of the
deaerator below the waterline.
Feedrate – Use in accordance with control proce-
dures GE establishes for a specific system. The
range of application is between 2 and 20 ppm
(mg/L) as Steamate PAS6074 to the feedwater.
Dilution – Steamate PAS6074 should be fed neat
directly out of the shipping container. It is not de-
signed for dilution or blending with other treat-
ment products.
Physical and Chemical Properties
Physical and chemical properties are shown on
the Material Safety Data Sheet, a copy of which is
available on request.