GE P&W Service Deionization (SDI) - Standard Deionized Tank Sizes - Manual

Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2010, General Electric Company. All rights reserved.
FSsdiStandDISizes_EN.doc Jul-10
Fact Sheet
Standard Deionized Tank Sizes
Description and Use
GE Standard Deionized Tanks use the finest semi-
conductor grade resins. These resins are regener-
ated in our high quality regeneration facilities
located throughout the United States.
The tanks are available with Cation, Anion and
Mixed Bed resins and also Activated Carbon. All
resin tanks are marked with color-coded labels that
indicate the tank fill date, TOC count, silica level and
rinse quality.
Our clients trust us to handle the responsibility of
maintaining and servicing thousands of their critical
DI water systems. This is due to our history of
experienced personnel, world-class facilities, supe-
rior resin quality and our leadership in producing the
finest ultrapure water systems around the world.
Deionized Tanks
Table 1 details the standard deionized tanks sizes
available.
Table 1: Standard Deionized Tank Sizes
Sizes
(ft 3 )
Capacity
(grains as CaCO
3
)
Flow Rate
(gpm)
3.60 25,200 10 to 15
2.00 14,000 5 to 8
1.20 8,400 3 to 5
0.45 3,150 1 to 3
0.25 1,750 0.5 to 2
For more information on our Standard Deionized
Tank Sizes or Service Deionization Service, contact
us at 1-800-446-8004, visit our website or contact
your GE representative.
Note: Product line manufactured by GE Mobile Water, Inc,
5900 Silver Creek Valley Rd, San Jose, CA 95138.