GE P&W CoalPlus - DusTreat DC9112E - Manual

Fact Sheet
Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2008, General Electric Company. All rights reserved.
E-PFDusTreatDC9112E_EN.doc Nov-08
DusTreat* DC9112E
Dust Control Binding Agent
• Provides excellent control of fugitive dust
emissions
• Effective on coal, ores and other bulk solid
materials
• Controls dust from active storage piles and
roads
• Reduces inventory losses
Description and Use
DusTreat* DC9112E is a binder specifically formu-
lated to control fugitive dust from storage piles and
haulage roads. This product is biodegradable and
does not contain corrosive chloride compounds or
waste oils. DusTreat DC9112E solutions are effec-
tive in reducing respirable dust.
Fugitive dust is typically generated during unload-
ing, stack-out, reclaim and crushing operations.
These dust emissions can be a safety hazard, an
environmental nuisance, and can increase mainte-
nance of material handling equipment. In addition,
these emissions can represent a substantial loss of
valuable fuel.
Fugitive emissions can be significantly reduced by
applying DusTreat DC9112E as a water solution to
water spray systems at a material transfer point or
from tank trucks equipped with sprays. DusTreat
DC9112E solutions provide residual control so that
treatment need only to be applied at a minimal
number of locations. This reduces the cost of heat-
ing value losses associated with moisture addition
to coal.
Treatment and Feeding Requirements
Proper treatment levels for DusTreat DC9112E de-
pend on many factors, such as: severity of the prob-
lem, environmental influences and operating
characteristics of the system. Therefore, this prod-
uct should be used in accordance with the control
parameters that GE Water & Process Technologies
establishes for the application.
Packaging Information
DusTreat DC9112E is a liquid blend available in a
wide variety of customized containers and delivery
methods. Contact your GE representative for de-
tails.
DusTreat DC9112E should be stored at tempera-
tures above freezing. To ensure maximum activity,
use this product within six months.
Safety Precautions
A Material Safety Data Sheet containing detailed
information about this product is available on re-
quest.