GE P&W Hydrogen Sulfide Scavengers - Steamate PAS4011 - Manual (Page 2)

Page 2 Steamate PAS4011 Fact Sheet
timal feedrate for your system. Steamate PAS4011
should be fed continuously.
This product can be fed neat or diluted to any
convenient feeding strength. Good quality
condensate or demineralized water should be used
for dilution.
Chemical feed tanks and storage tanks should be
mild or stainless steel. Mild steel pumps, valves, and
feedlines are acceptable. This product is not
compatible with PVC, nylon, natural rubber, butyl
rubber, Buna N, Buna S, urethane, Tygon, or Viton.
The product is compatible with Teflon and
polypropylene. (Tygon is a registered trademark of
Norton Co., Viton and Teflon are registered
trademarks of DuPont.)
General Properties
Physical properties of Steamate PAS4011 are
shown on the Material Safety Data Sheet, a copy of
which is available on request.
Packaging Information
Steamate PAS4011 is a liquid blend, available in a
wide variety of customized containers and delivery
methods. Contact your GE representative for de-
tails.
Storage
Store the product in a ventilated area, in the shade,
away from heat or open flame.
Safety Precautions
A Material Safety Data Sheet containing detailed
information about this product is available upon
request.